Safety Standards: What the Certifications Actually Mean
High-visibility vests and jackets sold in the UAE are generally built to EN ISO 20471 (the European standard) or ANSI/ISEA 107 (the American standard), both of which set minimum requirements for the area of fluorescent and reflective material a garment must carry. Both standards use a class system to indicate the level of visibility.
| Class |
Visibility Level |
Typical Use |
| Class 1 |
Minimal visibility, smallest area of fluorescent and reflective material |
Low-risk environments, away from moving traffic |
| Class 2 |
Moderate visibility, suits most site-based roles |
Warehouse workers, delivery riders, general construction staff |
| Class 3 |
Highest visibility, largest area of fluorescent and reflective material, usually a jacket rather than a vest alone |
Roadside work, high-traffic construction sites, night shifts |
Dubai's RTA delivery framework, for example, has referenced jackets and pants meeting recognised standards such as EN ISO 20471 for delivery riders, alongside other uniform requirements, which is one reason compliant reflective coverage matters as much as the branding itself.
Fabric Vest vs Net Vest: Which Should You Choose?
Safety vests are generally available in two base constructions, and the right one depends on the working environment.
| Type |
Best For |
Trade-off |
| Fabric Vest (63–235 gsm) |
All-day wear, printed logos, a more finished professional look |
Warmer than mesh in direct sun |
| Net / Mesh Vest (80–150 gsm) |
Hot outdoor conditions, better airflow |
Slightly less surface area for large printed designs |
Printing Methods for Safety Vests and Jackets
A safety jacket with company logo can be finished using several printing methods, chosen based on the design and how much daily wear and washing the garment needs to withstand.
| Method |
Best For |
Limitation |
| Screen Printing |
One to three colour logos on bulk safety jacket printing orders |
Limited colour count; not suited to photographic detail |
| Vinyl Transfer |
Sharp text and simple logos, including safety messages |
Less breathable over a large printed area |
| DTF Printing |
Full-colour logos with fine detail on smaller orders |
Higher cost per piece on very large volumes |
| Embroidery |
A durable, textured logo that withstands heavy daily wash cycles |
Not suited to full-colour or photographic designs |
Adding a Logo Without Losing Compliance
The most common mistake with a branded safety jacket is placing a large logo over or too close to the reflective strips, which can reduce the visible surface area the standard is measuring. Deluxe Printing plans logo placement on the chest, back panel, or side sections that sit clear of the reflective tape, so a custom safety vest keeps its full compliance while still carrying a clear, recognisable company logo.
Safety Vests and Jackets for Engineers
A safety jacket for engineers is generally built with sleeves and a more structured fit than a standard sleeveless vest, giving fuller coverage for site engineers and supervisors who spend long hours outdoors. A safety vest for engineers working shorter shifts or in warmer conditions may suit a lighter, sleeveless option instead, with the same reflective strips and logo placement options.
Finding a Safety Jacket Shop Near You in Dubai
Searching for safety jacket printing near me or a safety jacket shop near me usually means wanting fast turnaround and delivery straight to a site. As a safety vest supplier in UAE, Deluxe Printing produces every order in-house in Dubai and delivers directly to a construction site, warehouse, or office across Dubai, Abu Dhabi, and the wider UAE, so location isn't a limiting factor.
Closing
From a single reflective vest to bulk custom safety vest orders for a full construction crew, Deluxe Printing supplies businesses across Dubai and the wider UAE, with in-house proofing, a choice of printing methods, and delivery available directly to a site.
